FAQ

Ioe. Matou te tuʻuina atu i tagata faʻatau ni fofo OEM / ODM. Ole aofa'i ole fa'atonu ole OEM ole 10,000 fasi.

Matou te faʻapipiʻiina e tulafono a Malo Aufaatasi, ma e mafai foi ona matou tuʻuina atu faʻapitoa faʻapipiʻi e tusa ai ma manaʻoga o tagata faʻatau.

E iai a matou ISO9001, CB, CE, UL, BIS, UN38.3, KC, PSE.

Matou te tuʻuina atu maa ma le mana e le sili atu i le 10WH e fai ma faʻataʻitaʻiga saoloto.

120,000-150,000 fasi pepa i le aso, o oloa taʻitasi o loʻo i ai se gafatia gaosiga eseese, e mafai ona e talanoaina faʻamatalaga auiliili e tusa ai ma imeli.

E tusa ma le 35 aso. Ole taimi fa'apitoa e mafai ona fa'amaopoopo ile imeli.

Lua vaiaso (14 aso).

E masani ona matou talia le 30% totogi muamua o se tupe teu ma le 70% aʻo leʻi tuʻuina atu o le totogi mulimuli. O isi auala e mafai ona faʻatalanoa.

Matou te tuʻuina atu: FOB ma CIF.

Matou te talia totogi e ala ile TT.

Ua matou aveina oloa i Europa i Matu, Europa i Sisifo, Amerika i Matu, Sasaʻe Tutotonu, Asia, Aferika, ma isi nofoaga.

Batteries are a kind of energy conversion and storage devices that convert chemical or physical energy into electrical energy through reactions. According to the different energy conversion of the battery, the battery can be divided into a chemical battery and a biological battery. A chemical battery or chemical power source is a device that converts chemical energy into electrical energy. It comprises two electrochemically active electrodes with different components, respectively, composed of positive and negative electrodes. A chemical substance that can provide media conduction is used as an electrolyte. When connected to an external carrier, it delivers electrical energy by converting its internal chemical energy. A physical battery is a device that converts physical energy into electrical energy.

O le ese'esega tele o le mea e fa'agaoioi e ese. O mea galue o le maa lona lua e mafai ona toe fa'afo'i, a'o le mea galue o le maa muamua e le. O le fa'amama a le tagata lava ia o le maa muamua e la'ititi tele nai lo le maa lona lua. Ae, o le tetee i totonu e sili atu le tele nai lo le maa lona lua, o lea e maualalo ai le gafatia o le uta. E le gata i lea, e sili atu le taua o le malosi faʻapitoa ma le voluma faʻapitoa o le maa muamua nai lo maa o loʻo avanoa e mafai ona faʻaaogaina.

Ni-MH batteries use Ni oxide as the positive electrode, hydrogen storage metal as the negative electrode, and lye (mainly KOH) as the electrolyte. When the nickel-hydrogen battery is charged: Positive electrode reaction: Ni(OH)2 + OH- → NiOOH + H2O–e- Adverse electrode reaction: M+H2O +e-→ MH+ OH- When the Ni-MH battery is discharged: Positive electrode reaction: NiOOH + H2O + e- → Ni(OH)2 + OH- Negative electrode reaction: MH+ OH- →M+H2O +e-

The main component of the positive electrode of the lithium-ion battery is LiCoO2, and the negative electrode is mainly C. When charging, Positive electrode reaction: LiCoO2 → Li1-xCoO2 + xLi+ + xe- Negative reaction: C + xLi+ + xe- → CLix Total battery reaction: LiCoO2 + C → Li1-xCoO2 + CLix The reverse reaction of the above reaction occurs during discharge.

Commonly used IEC standards for batteries: The standard for nickel-metal hydride batteries is IEC61951-2: 2003; the lithium-ion battery industry generally follows UL or national standards. Commonly used national standards for batteries: The standards for nickel-metal hydride batteries are GB/T15100_1994, GB/T18288_2000; the standards for lithium batteries are GB/T10077_1998, YD/T998_1999, and GB/T18287_2000. In addition, the commonly used standards for batteries also include the Japanese Industrial Standard JIS C on batteries. IEC, the International Electrical Commission (International Electrical Commission), is a worldwide standardization organization composed of electrical committees of various countries. Its purpose is to promote the standardization of the world's electrical and electronic fields. IEC standards are standards formulated by the International Electrotechnical Commission.

O vaega autu o le nickel-metal hydride maa o pepa eletise lelei (nickel oxide), le lelei o le eletise (hydrogen storage alloy), electrolyte (tele KOH), pepa diaphragm, mama faʻamau, pulou eletise lelei, pusa maa, ma isi.

O vaega autu o maa lithium-ion o le pito i luga ma lalo o le ufiufi o le maa, pepa eletise lelei (mea aoga o le lithium cobalt oxide), separator (se membrane composite faʻapitoa), se eletise le lelei (mea aoga o le carbon), eletise eletise, pusa maa. (vaevae i ituaiga e lua o atigi uamea ma atigi alumini) ma isi.

E fa'atatau i le tete'e o lo'o o'o i ai le taimi nei o lo'o tafe i totonu o le ma'a pe a galue le maa. E aofia ai le ohmic i totonu tetee ma polarization i totonu tetee. O le taua tele o le tete'e i totonu o le maa o le a fa'aitiitia ai le voluma galue ma fa'apu'upu'u le taimi e alu ai. O le tete'e i totonu e tele lava ina a'afia i mea tau maa, faiga gaosiga, fausaga maa, ma isi mea. O se fa'ailoga taua e fua ai le fa'atinoga o ma'a. Manatua: E masani lava, o le tetee i totonu i le setete ua molia o le tulaga masani. Ina ia fa'atatau le tete'e i totonu o le ma'a, e tatau ona fa'aoga se mita fa'apitoa fa'alotoifale nai lo le multimeter i le ohm.

Ole la'asaga ole ma'a e fa'asino ile voltage fa'aalia ile fa'agaioiga masani. Ole numera ole voltage ole maa nickel-cadmium nickel-hydrogen lua ole 1.2V; ole numera ole voltage ole maa lithium lona lua ole 3.6V.

Tatala eletise eletise e faasino i le eseesega e mafai ona maua i le va o electrodes lelei ma le leaga o le maa pe a le galue le maa, o lona uiga, pe a leai se taimi e tafe atu i le matagaluega. Galulue voltage, lea e taʻua foi o le laina eletise, e faasino i le eseesega e ono mafai i le va o pou lelei ma le le lelei o le maa pe a galue le maa, o lona uiga, pe a ova i le taamilosaga.

O le gafatia o le maa ua vaevaeina i le mana faʻatatau ma le gafatia moni. O le malosi fa'atatau o le ma'a e fa'atatau i le fa'atonuga po'o le fa'amautinoaina e tatau i le ma'a ona fa'aalu le aofa'i aupito maualalo o le eletise i lalo o nisi tulaga fa'aleaogaina i le taimi o le mamanu ma le gaosiga o le afa. O le tulaga masani a le IEC o loʻo faʻamaonia ai o maa nickel-cadmium ma nickel-metal hydride o loʻo molia i le 0.1C mo le 16 itula ma faʻamalo i le 0.2C i le 1.0V i le vevela o le 20°C±5°C. O le malosi fa'atatau o le ma'a o lo'o fa'ailoaina ile C5. Lithium-ion ma'a ua faʻatonuina e faʻatonuina mo le 3 itula i lalo o le vevela vevela, faʻaauau pea (1C) -volte tumau (4.2V) faʻatonutonu tulaga manaʻomia, ona faʻamalo atu lea i le 0.2C i le 2.75V pe a faʻatulagaina le eletise faʻaalu. O le malosi moni o le maa e faasino i le malosi moni na tuʻuina atu e le afa i lalo o nisi tulaga faʻamalo, lea e masani ona aʻafia i le faʻafefeina o le fua ma le vevela (o le mea moni, o le malosi o le maa e tatau ona faʻamaonia ai le tau ma le tuʻuina atu o tulaga). Ole iunite ole malosi ole maa ole Ah, mAh (1Ah=1000mAh).

Pe a faʻateʻa le maa toe faʻaaogaina i le tele o le taimi nei (e pei o le 1C poʻo luga), ona o le "aafiaga o le fagu" o loʻo i ai i totonu o le faʻasalalauga i totonu o le ova o loʻo i ai nei, ua oʻo le maa i le voluma faʻamau pe a le atoatoa le malosi. , Ona faʻaaogaina lea o se laʻititi laʻititi e pei o le 0.2C e mafai ona faʻaauau pea ona aveese, seia oʻo i le 1.0V / fasi (nickel-cadmium ma le nickel-hydrogen battery) ma le 3.0V / piece (lithium battery), o le gafatia faʻamalolo e taʻua o le gafatia totoe.

O le fa'avae fa'ate'a o ma'a toe fa'aleleia o le Ni-MH e masani lava ona fa'asino i le laina eletise lea e mautu ai le voluma galue a le ma'a pe a fa'ate'a i lalo o se faiga fa'alele. O lona tau e fesoʻotaʻi ma le faʻaogaina o le taimi nei. O le tele o le taimi nei, o le maualalo o le mamafa. O le faʻavaeina o maa lithium-ion e masani lava ona taofi le molia pe a oʻo i le voltage 4.2V, ma o le taimi nei e itiiti ifo i le 0.01C i se voltage faifaipea, ona tuʻu lea mo le 10 minute, ma faʻamalo i le 3.6V i soʻo se fua faatatau o le lafoaia. taimi nei. O se tulaga talafeagai e fua ai le lelei o maa.

E tusa ai ma le tulaga IEC, o le faailoga o le maa Ni-MH e aofia ai le 5 vaega. 01) Battery type: HF and HR indicate nickel-metal hydride batteries 02) Battery size information: including the diameter and height of the round battery, the height, width, and thickness of the square battery, and the values ​​are separated by a slash, unit: mm 03) Discharge characteristic symbol: L means that the suitable discharge current rate is within 0.5C M indicates that the suitable discharge current rate is within 0.5-3.5C H indicates that the suitable discharge current rate is within 3.5-7.0C X indicates that the battery can work at a high rate discharge current of 7C-15C. 04) High-temperature battery symbol: represented by T 05) Battery connection piece: CF represents no connection piece, HH represents the connection piece for battery pull-type series connection, and HB represents the connection piece for side-by-side series connection of battery belts. Mo se faʻataʻitaʻiga, HF18/07/49 o loʻo faʻatusalia se sikuea nickel-metal hydride maa ma le lautele o le 18mm, 7mm, ma le maualuga o le 49mm. KRMT33/62HH fa'atusa maa nickel-cadmium; le fua o le lafoaia o le va o le 0.5C-3.5, maualuga-vevela faasologa tasi maa (e aunoa ma se vaega fesootai), lautele 33mm, maualuga 62mm. According to the IEC61960 standard, the identification of the secondary lithium battery is as follows: 01) The battery logo composition: 3 letters, followed by five numbers (cylindrical) or 6 (square) numbers. 02) Le mataitusi muamua: faʻaalia ai mea eletise eletise leaga o le maa. I—e fai ma sui o le lithium-ion ma le maa ua fausia i totonu; L-e fai ma sui o le lithium metal electrode poʻo le lithium alloy electrode. 03) Le mataitusi lona lua: faʻaalia le mea cathode o le maa. C-kobalt fa'avae eletise; N—eletise faavae nikeli; M—eletise e faavae i le manganese; V-vanadium fa'avae eletise. 04) Le tusi lona tolu: faʻaalia foliga o le maa. R-faatusaina maa cylindrical; L-faatusa maa sikuea. 05) Numera: Maa Cylindrical: 5 numera e taʻu mai ai le lautele ma le maualuga o le afa. O le iunite o le lautele o le milimita, ma le tele o le tasi vae sefulu o le milimita. Afai e sili atu pe tutusa ma le 100mm soʻo se lautele poʻo le maualuga, e tatau ona faʻaopoopoina se laina faʻasolosolo i le va o lapopoa e lua. Ma'a sikuea: 6 numera o loʻo faʻaalia ai le mafiafia, lautele, ma le maualuga o le afa i millimita. Afai o soʻo se vaega e tolu e sili atu pe tutusa ma le 100mm, e tatau ona faʻaopoopoina se faʻailoga i le va o fua; afai o se tasi o itu e tolu e itiiti ifo i le 1mm, o le mataitusi "t" e faaopoopo i luma o lenei fua, ma o le iunite o lenei fua o le tasi vaesefulu o le milimita. Mo se faʻataʻitaʻiga, o le ICR18650 o loʻo faʻatusalia ai se maa lithium-ion faʻasolosolo lua; o le mea o le cathode o le cobalt, o lona lautele e tusa ma le 18mm, ma lona maualuga e tusa ma le 65mm. ICR20/1050. ICP083448 o loʻo faʻatusalia se sikuea lua lithium-ion maa; o le mea o le cathode o le cobalt, o lona mafiafia e tusa ma le 8mm, o le lautele e uiga i le 34mm, ma le maualuga e tusa ma le 48mm. ICP08/34/150 o loʻo faʻatusalia se sikuea lua lithium-ion maa; o le mea o le cathode o le cobalt, o lona mafiafia e tusa ma le 8mm, o le lautele e tusa ma le 34mm, ma le maualuga e tusa ma le 150mm.

01) Non-dry meson (paper) such as fiber paper, double-sided tape 02) PVC film, trademark tube 03) Connecting sheet: stainless steel sheet, pure nickel sheet, nickel-plated steel sheet 04) Lead-out piece: stainless steel piece (easy to solder) Pure nickel sheet (spot-welded firmly) 05) Plugs 06) Protection components such as temperature control switches, overcurrent protectors, current limiting resistors 07) Carton, paper box 08) Plastic shell

01) Beautiful, brand 02) The battery voltage is limited. To obtain a higher voltage, it must connect multiple batteries in series. 03) Protect the battery, prevent short circuits, and prolong battery life 04) Size limitation 05) Easy to transport 06) Design of special functions, such as waterproof, unique appearance design, etc.

E masani ona aofia ai le voltage, teteʻe i totonu, gafatia, malosi malosi, faʻamalosi i totonu, fua faʻatatau o le tagata lava ia, faʻasologa o le ola, faʻamaufaʻailogaina, faʻaogaina o le saogalemu, faʻaogaina o mea, foliga vaaia, ma isi.

01) Cycle life 02) Different rate discharge characteristics 03) Discharge characteristics at different temperatures 04) Charging characteristics 05) Self-discharge characteristics 06) Storage characteristics 07) Over-discharge characteristics 08) Internal resistance characteristics at different temperatures 09) Temperature cycle test 10) Drop test 11) Vibration test 12) Capacity test 13) Internal resistance test 14) GMS test 15) High and low-temperature impact test 16) Mechanical shock test 17) High temperature and high humidity test

01) Short circuit test 02) Overcharge and over-discharge test 03) Withstand voltage test 04) Impact test 05) Vibration test 06) Heating test 07) Fire test 09) Variable temperature cycle test 10) Trickle charge test 11) Free drop test 12) low air pressure test 13) Forced discharge test 15) Electric heating plate test 17) Thermal shock test 19) Acupuncture test 20) Squeeze test 21) Heavy object impact test

Charging method of Ni-MH battery: 01) Constant current charging: the charging current is a specific value in the whole charging process; this method is the most common; 02) Constant voltage charging: During the charging process, both ends of the charging power supply maintain a constant value, and the current in the circuit gradually decreases as the battery voltage increases; 03) Constant current and constant voltage charging: The battery is first charged with constant current (CC). When the battery voltage rises to a specific value, the voltage remains unchanged (CV), and the wind in the circuit drops to a small amount, eventually tending to zero. Lithium battery charging method: Constant current and constant voltage charging: The battery is first charged with constant current (CC). When the battery voltage rises to a specific value, the voltage remains unchanged (CV), and the wind in the circuit drops to a small amount, eventually tending to zero.

O le tulaga faʻavaomalo faʻavaomalo a le IEC o loʻo faʻamaonia ai o le tuʻuina atu ma le faʻaaogaina o maa nickel-metal hydride o le: muamua faʻamalo le maa i le 0.2C i le 1.0V / fasi, ona molia lea i le 0.1C mo le 16 itula, tuʻu mo le 1 itula, ma tuʻu ai. i le 0.2C i le 1.0V / fasi, o lona uiga e totogi ma faʻasaʻo le tulaga maa.

E masani ona fa'aogaina e le fa'atauina o le pa'u le fa'amomoli ma le fa'asa'oina, fa'atulaga mo le 5 sekone ona fa'aola lea mo le 1 sekone. O le a faʻaitiitia ai le tele o le okesene e gaosia i le taimi o le faʻatonuina o le eletise i le eletise i lalo o le paʻu faʻamalo. E le gata e faʻatapulaʻaina le aofaʻi o le eletise eletise i totonu, ae o na maʻa tuai ua matua faʻafefeteina o le a faasolosolo malie ona toe faʻaleleia pe faʻalatalata atu i le tulaga muamua pe a maeʻa le 5-10 taimi o le faʻaaogaina ma le faʻaaogaina o lenei auala faʻapipiʻi.

E fa'aogaina le tosoina o le maa e fa'amalie ai le gau o le malosi e mafua mai i le fa'amalo o le ma'a pe a uma ona fa'atumuina. E masani lava, o le faʻaogaina o le pulse i le taimi nei e faʻaaogaina e ausia ai le faʻamoemoe o loʻo i luga.

O le lelei o le fa'atonuina e fa'atatau i le fuaina o le maualuga o le malosi eletise e fa'aaogaina e le maa i le taimi o le fa'atonuga e fa'aliliuina i le malosi kemikolo e mafai ona teuina e le maa. E masani lava ona aʻafia i tekinolosi maa ma le vevela o le siosiomaga galue o le afa-masani, o le maualuga o le vevela o le ambient, o le faʻaititia o le lelei o le faʻatonuina.

O le lelei o le lafoaia e faasino i le malosiaga moni e alu atu i le voluma faʻamau i lalo o nisi tulaga faʻamalolo i le gafatia faʻatatau. E masani ona aʻafia i le fua faʻasalalau, vevela vevela, teteʻe i totonu, ma isi mea. E masani lava, o le maualuga o le faʻasalaga, o le maualuga lea o le faʻasalaga. O le maualalo o le faʻaleleia lelei o le lafoaia. O le maualalo o le vevela, o le faʻaitiitia o le lelei o le lafoaia.

The output power of a battery refers to the ability to output energy per unit time. It is calculated based on the discharge current I and the discharge voltage, P=U*I, the unit is watts. The lower the internal resistance of the battery, the higher the output power. The internal resistance of the battery should be less than the internal resistance of the electrical appliance. Otherwise, the battery itself consumes more power than the electrical appliance, which is uneconomical and may damage the battery.

Self-discharge is also called charge retention capability, which refers to the retention capability of the battery's stored power under certain environmental conditions in an open circuit state. Generally speaking, self-discharge is mainly affected by manufacturing processes, materials, and storage conditions. Self-discharge is one of the main parameters to measure battery performance. Generally speaking, the lower the storage temperature of the battery, the lower the self-discharge rate, but it should also note that the temperature is too low or too high, which may damage the battery and become unusable. After the battery is fully charged and left open for some time, a certain degree of self-discharge is average. The IEC standard stipulates that after fully charged, Ni-MH batteries should be left open for 28 days at a temperature of 20℃±5℃ and humidity of (65±20)%, and the 0.2C discharge capacity will reach 60% of the initial total.

The self-discharge test of lithium battery is: Generally, 24-hour self-discharge is used to test its charge retention capacity quickly. The battery is discharged at 0.2C to 3.0V, constant current. Constant voltage is charged to 4.2V, cut-off current: 10mA, after 15 minutes of storage, discharge at 1C to 3.0 V test its discharge capacity C1, then set the battery with constant current and constant voltage 1C to 4.2V, cut-off current: 10mA, and measure 1C capacity C2 after being left for 24 hours. C2/C1*100% should be more significant than 99%.

The internal resistance in the charged state refers to the internal resistance when the battery is 100% fully charged; the internal resistance in the discharged state refers to the internal resistance after the battery is fully discharged. Generally speaking, the internal resistance in the discharged state is not stable and is too large. The internal resistance in the charged state is more minor, and the resistance value is relatively stable. During the battery's use, only the charged state's internal resistance is of practical significance. In the later period of the battery's help, due to the exhaustion of the electrolyte and the reduction of the activity of internal chemical substances, the battery's internal resistance will increase to varying degrees.

Ole tete'e fa'alotoifale o le tete'e a le ma'a i totonu a'o fa'a'ave'esea, ma le malosi o le tete'e i totonu o le tete'e i totonu o le ma'a i le taimi o le fa'atumuina.

The IEC stipulates that the standard overcharge test for nickel-metal hydride batteries is: Discharge the battery at 0.2C to 1.0V/piece, and charge it continuously at 0.1C for 48 hours. The battery should have no deformation or leakage. After overcharge, the discharge time from 0.2C to 1.0V should be more than 5 hours.

IEC stipulates that the standard cycle life test of nickel-metal hydride batteries is: After the battery is placed at 0.2C to 1.0V/pc 01) Charge at 0.1C for 16 hours, then discharge at 0.2C for 2 hours and 30 minutes (one cycle) 02) Charge at 0.25C for 3 hours and 10 minutes, and discharge at 0.25C for 2 hours and 20 minutes (2-48 cycles) 03) Charge at 0.25C for 3 hours and 10 minutes, and release to 1.0V at 0.25C (49th cycle) 04) Charge at 0.1C for 16 hours, put it aside for 1 hour, discharge at 0.2C to 1.0V (50th cycle). For nickel-metal hydride batteries, after repeating 400 cycles of 1-4, the 0.2C discharge time should be more significant than 3 hours; for nickel-cadmium batteries, repeating a total of 500 cycles of 1-4, the 0.2C discharge time should be more critical than 3 hours.

Refers to the internal air pressure of the battery, which is caused by the gas generated during the charging and discharging of the sealed battery and is mainly affected by battery materials, manufacturing processes, and battery structure. The main reason for this is that the gas generated by the decomposition of moisture and organic solution inside the battery accumulates. Generally, the internal pressure of the battery is maintained at an average level. In the case of overcharge or over-discharge, the internal pressure of the battery may increase: For example, overcharge, positive electrode: 4OH--4e → 2H2O + O2↑; ① The generated oxygen reacts with the hydrogen precipitated on the negative electrode to produce water 2H2 + O2 → 2H2O ② If the speed of reaction ② is lower than that of reaction ①, the oxygen generated will not be consumed in time, which will cause the internal pressure of the battery to rise.

IEC stipulates that the standard charge retention test for nickel-metal hydride batteries is: After putting the battery at 0.2C to 1.0V, charge it at 0.1C for 16 hours, store it at 20℃±5℃ and humidity of 65%±20%, keep it for 28 days, then discharge it to 1.0V at 0.2C, and Ni-MH batteries should be more than 3 hours. The national standard stipulates that the standard charge retention test for lithium batteries is: (IEC has no relevant standards) the battery is placed at 0.2C to 3.0/piece, and then charged to 4.2V at a constant current and voltage of 1C, with a cut-off wind of 10mA and a temperature of 20 After storing for 28 days at ℃±5℃, discharge it to 2.75V at 0.2C and calculate the discharge capacity. Compared with the battery's nominal capacity, it should be no less than 85% of the initial total.

Fa'aaogā se uaea e iai le fa'alotoifale ≤100mΩ e fa'afeso'ota'i ai pou lelei ma le le lelei o le ma'a ua uma i totonu o se pusa pa'u e fa'a pupuu le pou lelei ma le leaga. E le tatau ona pa pe mu le maa.

The high temperature and humidity test of Ni-MH battery are: After the battery is fully charged, store it under constant temperature and humidity conditions for several days, and observe no leakage during storage. The high temperature and high humidity test of lithium battery is: (national standard) Charge the battery with 1C constant current and constant voltage to 4.2V, cut-off current of 10mA, and then put it in a continuous temperature and humidity box at (40±2)℃ and relative humidity of 90%-95% for 48h, then take out the battery in (20 Leave it at ±5)℃ for two h. Observe that the appearance of the battery should be standard. Then discharge to 2.75V at a constant current of 1C, and then perform 1C charging and 1C discharge cycles at (20±5)℃ until the discharge capacity Not less than 85% of the initial total, but the number of cycles is not more than three times.

A maeʻa ona faʻatumu atoa le maa, tuʻu i totonu o le ogaumu ma faʻavevela mai le vevela o le potu ile fua ole 5°C/min. 5°C/min. A oʻo i le 130 ° C le vevela o le ogaumu, taofi mo le 30 minute. E le tatau ona pa pe mu le maa. A oʻo i le 130 ° C le vevela o le ogaumu, taofi mo le 30 minute. E le tatau ona pa pe mu le maa.

The temperature cycle experiment contains 27 cycles, and each process consists of the following steps: 01) The battery is changed from average temperature to 66±3℃, placed for 1 hour under the condition of 15±5%, 02) Switch to a temperature of 33±3°C and humidity of 90±5°C for 1 hour, 03) The condition is changed to -40±3℃ and placed for 1 hour 04) Put the battery at 25℃ for 0.5 hours These four steps complete a cycle. After 27 cycles of experiments, the battery should have no leakage, alkali climbing, rust, or other abnormal conditions.

A mae'a ona fa'atumu atoa le ma'a po'o le ma'a, ona pa'u ifo lea mai le maualuga o le 1m i le sima (po'o le sima) fa'atolu taimi e maua mai ai ni fa'ate'ia i fa'asologa fa'afuase'i.

The vibration test method of Ni-MH battery is: After discharging the battery to 1.0V at 0.2C, charge it at 0.1C for 16 hours, and then vibrate under the following conditions after being left for 24 hours: Amplitude: 0.8mm Make the battery vibrate between 10HZ-55HZ, increasing or decreasing at a vibration rate of 1HZ every minute. The battery voltage change should be within ±0.02V, and the internal resistance change should be within ±5mΩ. (Vibration time is 90min) The lithium battery vibration test method is: After the battery is discharged to 3.0V at 0.2C, it is charged to 4.2V with constant current and constant voltage at 1C, and the cut-off current is 10mA. After being left for 24 hours, it will vibrate under the following conditions: The vibration experiment is carried out with the vibration frequency from 10 Hz to 60 Hz to 10 Hz in 5 minutes, and the amplitude is 0.06 inches. The battery vibrates in three-axis directions, and each axis shakes for half an hour. The battery voltage change should be within ±0.02V, and the internal resistance change should be within ±5mΩ.

A uma ona fa'atumu atoa le ma'a, tu'u fa'alava se u'a malo ma tu'u se mea e 20-pauna mai se maualuga patino i luga o le u'a malo. E le tatau ona pa pe mu le maa.

A uma ona fa'atumu atoa le ma'a, pasi se fao i le ogatotonu o le afa ma tu'u le pine i totonu o le ma'a. E le tatau ona pa pe mu le maa.

Tuu le maa ua uma ona tumu i luga o se masini faamafanafana ma se ufiufi puipuia tulaga ese mo le afi, ma e leai se otaota e ui atu i totonu o le ufiufi puipui.

Ua pasia le ISO9001: 2000 tulaga lelei tusi faamaonia ma ISO14001: 2004 siosiomaga puipuiga faiga tusi faamaonia; o le oloa ua maua le EU CE certification ma North America UL certification, pasia le SGS suʻega puipuiga o le siosiomaga, ma maua le laisene pateni o Ovonic; i le taimi lava e tasi, ua faamaonia e le PICC oloa a le kamupani i le lalolagi Scope underwriting.

O le maa Sauni e fa'aoga o se ituaiga fou o le Ni-MH maa fa'atasi ai ma le maualuga o le fa'amauina o le tau na fa'alauiloa e le kamupani. Ose maa e tete'e e teu ai ma e lua fa'atinoga o le maa muamua ma le lua ma e mafai ona sui ai le maa muamua. O lona uiga, o le maa e mafai ona toe faʻaaogaina ma e maualuga atu le malosi o totoe pe a uma ona teuina mo le taimi tutusa e pei o maa masani lona lua Ni-MH.

Compared with similar products, this product has the following remarkable features: 01) Smaller self-discharge; 02) Longer storage time; 03) Over-discharge resistance; 04) Long cycle life; 05) Especially when the battery voltage is lower than 1.0V, it has a good capacity recovery function; More importantly, this type of battery has a charge retention rate of up to 75% when stored in an environment of 25°C for one year, so this battery is the ideal product to replace disposable batteries.

01) Please read the battery manual carefully before use; 02) The electrical and battery contacts should be clean, wiped clean with a damp cloth if necessary, and installed according to the polarity mark after drying; 03) Do not mix old and new batteries, and different types of batteries of the same model can not be combined so as not to reduce the efficiency of use; 04) The disposable battery cannot be regenerated by heating or charging; 05) Do not short-circuit the battery; 06) Do not disassemble and heat the battery or throw the battery into the water; 07) When electrical appliances are not in use for a long time, it should remove the battery, and it should turn the switch off after use; 08) Do not discard waste batteries randomly, and separate them from other garbage as much as possible to avoid polluting the environment; 09) When there is no adult supervision, do not allow children to replace the battery. Small batteries should be placed out of the reach of children; 10) it should store the battery in a cool, dry place without direct sunlight.

At present, nickel-cadmium, nickel-metal hydride, and lithium-ion rechargeable batteries are widely used in various portable electrical equipment (such as notebook computers, cameras, and mobile phones). Each rechargeable battery has its unique chemical properties. The main difference between nickel-cadmium and nickel-metal hydride batteries is that the energy density of nickel-metal hydride batteries is relatively high. Compared with batteries of the same type, the capacity of Ni-MH batteries is twice that of Ni-Cd batteries. This means that the use of nickel-metal hydride batteries can significantly extend the working time of the equipment when no additional weight is added to the electrical equipment. Another advantage of nickel-metal hydride batteries is that they significantly reduce the "memory effect" problem in cadmium batteries to use nickel-metal hydride batteries more conveniently. Ni-MH batteries are more environmentally friendly than Ni-Cd batteries because there are no toxic heavy metal elements inside. Li-ion has also quickly become a common power source for portable devices. Li-ion can provide the same energy as Ni-MH batteries but can reduce weight by about 35%, suitable for electrical equipment such as cameras and laptops. It is crucial. Li-ion has no "memory effect," The advantages of no toxic substances are also essential factors that make it a common power source. It will significantly reduce the discharge efficiency of Ni-MH batteries at low temperatures. Generally, the charging efficiency will increase with the increase of temperature. However, when the temperature rises above 45°C, the performance of rechargeable battery materials at high temperatures will degrade, and it will significantly shorten the battery's cycle life.

Ole fua ole la'u e fa'atatau ile fua faatatau ile va ole la'u alu (A) ma le malosi fa'atatau (A•h) ile taimi e mu ai. O le fa'aalu o le fua fa'aleitula e fa'atatau i itula e mana'omia e fa'aalu ai le malosi fa'atatau i se mea fa'apitoa o lo'o iai nei.

Since the battery in a digital camera has a low temperature, the active material activity is significantly reduced, which may not provide the camera's standard operating current, so outdoor shooting in areas with low temperature, especially. Pay attention to the warmth of the camera or battery.

Totogi -10—45 ℃ Faʻasalaga -30-55 ℃

Afai e te faʻafefiloi maʻa fou ma maʻa tuai ma faʻaoga eseese pe faʻaoga faʻatasi, atonu e i ai le leakage, zero voltage, ma isi. E mafua lenei mea ona o le eseesega o le malosi i le taimi o le faʻatonuina, lea e mafua ai ona faʻaalu nisi maa i le taimi o le faʻatonuina. O nisi ma'a e le'o atoatoa ona fa'atumuina ma e mafai ona gafatia a'o lafoa'i. O le maa maualuga e leʻo faʻamalo atoa, ma o le maʻa maualalo o loʻo sili atu le faʻaaogaina. I se li'o mata'utia faapena, ua leaga le ma'a, ma liki pe maualalo (zero) voltage.

O le fa'afeso'ota'i pito pito i fafo e lua o le maa i so'o se ta'avale e mafua ai se va'aiga pupuu i fafo. O le a'oa'oga pupuu e ono tula'i mai ai ni a'afiaga ogaoga mo ituaiga maa eseese, e pei o le si'itia o le vevela o le electrolyte, si'itia le mamafa o le ea i totonu, ma isi. O lenei tulaga e matua afaina ai le maa. Afai e faaletonu le valve saogalemu, e ono tupu ai se pa. O le mea lea, 'aua ne'i pupu'u le ma'a i fafo.

01) Charging: When choosing a charger, it is best to use a charger with correct charging termination devices (such as anti-overcharge time devices, negative voltage difference (-V) cut-off charging, and anti-overheating induction devices) to avoid shortening the battery life due to overcharging. Generally speaking, slow charging can prolong the service life of the battery better than fast charging. 02) Discharge: a. The depth of discharge is the main factor affecting battery life. The higher the depth of release, the shorter the battery life. In other words, as long as the depth of discharge is reduced, it can significantly extend the battery's service life. Therefore, we should avoid over-discharging the battery to a very low voltage. b. When the battery is discharged at a high temperature, it will shorten its service life. c. If the designed electronic equipment cannot completely stop all current, if the equipment is left unused for a long time without taking out the battery, the residual current will sometimes cause the battery to be excessively consumed, causing the storm to over-discharge. d. When using batteries with different capacities, chemical structures, or different charge levels, as well as batteries of various old and new types, the batteries will discharge too much and even cause reverse polarity charging. 03) Storage: If the battery is stored at a high temperature for a long time, it will attenuate its electrode activity and shorten its service life.

Afai o le a le faʻaaogaina le mea eletise mo se taimi umi, e sili ona aveese le maa ma tuʻu i totonu o se nofoaga matutu ma maualalo. Afai e leai, e tusa lava pe tape le mea eletise, o le a faia pea e le faiga le maa e maualalo le gaosiga o loʻo i ai nei, lea o le a faʻapuupuu ai Le ola tautua o le afa.

According to the IEC standard, it should store the battery at a temperature of 20℃±5℃ and humidity of (65±20)%. Generally speaking, the higher the storage temperature of the storm, the lower the remaining rate of capacity, and vice versa, the best place to store the battery when the refrigerator temperature is 0℃-10℃, especially for primary batteries. Even if the secondary battery loses its capacity after storage, it can be recovered as long as it is recharged and discharged several times. In theory, there is always energy loss when the battery is stored. The inherent electrochemical structure of the battery determines that the battery capacity is inevitably lost, mainly due to self-discharge. Usually, the self-discharge size is related to the solubility of the positive electrode material in the electrolyte and its instability (accessible to self-decompose) after being heated. The self-discharge of rechargeable batteries is much higher than that of primary batteries. If you want to store the battery for a long time, it is best to put it in a dry and low-temperature environment and keep the remaining battery power at about 40%. Of course, it is best to take out the battery once a month to ensure the excellent storage condition of the storm, but not to completely drain the battery and damage the battery.

A battery that is internationally prescribed as a standard for measuring potential (potential). It was invented by American electrical engineer E. Weston in 1892, so it is also called Weston battery. The positive electrode of the standard battery is the mercury sulfate electrode, the negative electrode is cadmium amalgam metal (containing 10% or 12.5% ​​cadmium), and the electrolyte is acidic, saturated cadmium sulfate aqueous solution, which is saturated cadmium sulfate and mercurous sulfate aqueous solution.

01) External short circuit or overcharge or reverse charge of the battery (forced over-discharge); 02) The battery is continuously overcharged by high-rate and high-current, which causes the battery core to expand, and the positive and negative electrodes are directly contacted and short-circuited; 03) The battery is short-circuited or slightly short-circuited. For example, improper placement of the positive and negative poles causes the pole piece to contact the short circuit, positive electrode contact, etc.

01) Whether a single battery has zero voltage; 02) The plug is short-circuited or disconnected, and the connection to the plug is not good; 03) Desoldering and virtual welding of lead wire and battery; 04) The internal connection of the battery is incorrect, and the connection sheet and the battery are leaked, soldered, and unsoldered, etc.; 05) The electronic components inside the battery are incorrectly connected and damaged.

To prevent the battery from being overcharged, it is necessary to control the charging endpoint. When the battery is complete, there will be some unique information that it can use to judge whether the charging has reached the endpoint. Generally, there are the following six methods to prevent the battery from being overcharged: 01) Peak voltage control: Determine the end of charging by detecting the peak voltage of the battery; 02) dT/DT control: Determine the end of charging by detecting the peak temperature change rate of the battery; 03) △T control: When the battery is fully charged, the difference between the temperature and the ambient temperature will reach the maximum; 04) -△V control: When the battery is fully charged and reaches a peak voltage, the voltage will drop by a particular value; 05) Timing control: control the endpoint of charging by setting a specific charging time, generally set the time required to charge 130% of the nominal capacity to handle;

01) Zero-voltage battery or zero-voltage battery in the battery pack; 02) The battery pack is disconnected, the internal electronic components and the protection circuit is abnormal; 03) The charging equipment is faulty, and there is no output current; 04) External factors cause the charging efficiency to be too low (such as extremely low or extremely high temperature).